Media Filter Image
Pressure Sand / Dual Media Filter
Heavy-duty filtration stage for reducing fine suspended solids, turbidity, flocs, and particulate carry-over from STP or ETP treated water.
ADVANCED WASTEWATER POLISHING SOLUTIONS
Industrial Tertiary
Treatment Plant for
Water Reuse
WTE tertiary treatment plant solutions are engineered to polish biologically treated wastewater from STP and ETP systems through pressure filtration, activated carbon adsorption, micron filtration, ultrafiltration, and disinfection. Our TTP systems reduce TSS, turbidity, colour, odour, residual organics, and microbial load to support compliant discharge and reliable non-potable water reuse.
TTP Plant View
Complete Tertiary Treatment Plant Overview
Understand how a WTE tertiary treatment plant polishes secondary treated water through filtration, carbon treatment, disinfection, monitoring, and reuse storage.
Engineered Tertiary Wastewater Polishing System
Secondary treated water from STP, ETP, MBBR, SBR, MBR, or clarifier outlets enters the Tertiary Treatment Plant for final polishing.
Fine solids, turbidity, colour, odour, residual organics, and microbial load are reduced through staged filtration and disinfection before reuse or discharge.
Treated Water InletClarified STP or ETP water is collected in a feed tank for stable flow, dosing, and pressure filtration.
Media FiltrationPressure sand, dual media, or multimedia filters remove fine TSS, turbidity, flocs, and carry-over solids.
Carbon & Fine PolishingActivated carbon, micron cartridge, or ultrafiltration stages improve clarity, colour, odour, and reuse quality.
Disinfected Reuse OutletUV, chlorine, or ozone disinfection prepares polished water for flushing, gardening, washing, cooling tower make-up, or compliant discharge.
Feed TankTreated water entry
Filtration SkidMedia and carbon polishing
Dosing & PanelAutomation and control
Backwash LineFilter cleaning arrangement
TTP Plant View
Overview
What Is a Tertiary Treatment Plant?
A Tertiary Treatment Plant is an advanced wastewater polishing system installed after secondary treatment to improve final treated water quality for reuse or compliant discharge. WTE designs TTP plants for turbidity reduction, TSS removal, colour and odour control, residual COD/BOD polishing, pathogen reduction, and consistent reuse-ready output.
For a complete wastewater recovery line, the tertiary treatment plant can be integrated after Sewage Treatment Plant, Effluent Treatment Plant, biological treatment, clarification, MBR systems, and upstream of RO Plant or Zero Liquid Discharge System solutions.
TSS & Turbidity ReductionColour & Odour ControlFinal DisinfectionReuse-Ready Output
TTP System Highlights
Custom-built for treated water quality, reuse goals, and filtration duty
WTE reviews inlet TSS, turbidity, residual COD/BOD, colour, oil traces, microbial load, peak flow, reuse requirement, available pressure, backwash provision, and automation level before designing the tertiary treatment plant.
24/7Polishing Operation
LowTurbidity & Colour
AutoBackwash & Dosing
CustomFiltration Selection
[ Add Tertiary Treatment Plant Overview Image Here ]
Systems We Offer
Tertiary Treatment Plant Configurations
Select pressure sand filter, dual media filter, activated carbon filter, micron filtration, ultrafiltration, UV disinfection, chlorination, or automated polishing systems based on inlet quality, outlet target, reuse application, space, and operating duty.
ACF Image
Activated Carbon Filter System
Carbon adsorption stage for reducing colour, odour, chlorine traces, and organic residues before treated wastewater reuse.
UF Image
Ultrafiltration Tertiary System
Membrane polishing system for low-turbidity reuse water, improved pathogen barrier, high clarity, and consistent outlet quality.
Disinfection Skid Image
Automated Polishing & Disinfection Skid
Compact skid with feed pumps, filters, dosing, UV/chlorination, valves, instruments, backwash arrangement, and control panel.
[ Add Tertiary Treatment Plant Features Image ]
Key Benefits
Tertiary Treatment Plant Benefits for Daily Operation
A properly designed Tertiary Treatment Plant improves final water clarity, reduces suspended solids and turbidity, protects reuse systems, and supports reliable discharge compliance.
Reliable TSS & Turbidity RemovalStaged media filtration removes fine particles, biological carry-over, flocs, and suspended solids from secondary treated water.
Better Treated Water ReusePolished and disinfected water can be reused for flushing, gardening, washing, cooling tower make-up, and non-potable utilities.
Colour, Odour & Organics ControlActivated carbon and dosing options help reduce colour, odour, residual organics, chlorine traces, and aesthetic issues.
Automatic Backwash OperationPLC-based automation manages feed pumps, dosing, filter backwash, valve sequencing, disinfection, alarms, and operating cycles.
Compact Modular DesignSkid-mounted polishing systems reduce installation time, simplify expansion, and integrate easily with existing STP or ETP outlets.
Compliance & Reuse SupportSystem design considers inlet TSS/turbidity, filtration velocity, media depth, backwash rate, contact time, and outlet norms.
Working Process
How a Tertiary Treatment Plant Works
A Tertiary Treatment Plant uses feed equalization, dosing, pressure filtration, carbon polishing, fine filtration, disinfection, and monitoring to produce reuse-ready treated water.
1
Treated Water Collection
Secondary treated outlet from STP, ETP, clarifier, or MBR is collected in a feed tank for stable flow and steady pumping.
2
Dosing & Media Filtration
Coagulant, pH correction, or antiscalant dosing is provided before pressure sand, dual media, or multimedia filtration.
3
Carbon / Fine Polishing
Activated carbon, micron cartridges, or ultrafiltration reduce colour, odour, residual organics, fine colloids, and microbial carry-over.
4
Disinfection & Reuse Storage
UV, chlorine, or ozone disinfection controls pathogens before polished water is stored for reuse or compliant discharge.
Applications
Tertiary Treatment Plant Applications for Reuse and Compliance
Used in residential, commercial, institutional, hospitality, healthcare, and industrial facilities that need polished wastewater reuse, low turbidity, final disinfection, and dependable discharge compliance.
STP Treated Water ReuseETP Treated Effluent PolishingHotels, Resorts & ClubsHospitals & Healthcare FacilitiesCommercial Buildings & IT ParksFactories & Industrial CampusesCooling Tower Make-Up WaterFlushing, Gardening & Washing
Project Gallery
Tertiary Treatment Plant Installation & System Views
Showcase tertiary treatment plant installations including feed tanks, pressure sand filters, dual media filters, activated carbon filters, micron cartridges, ultrafiltration skids, disinfection units, backwash lines, and reuse outlets.
Gallery Image 1
Treated water feed tank and transfer pump arrangementGallery Image 2
Pressure sand and dual media filtration skidGallery Image 3
Activated carbon filter for colour and odour polishingGallery Image 4
Micron cartridge or ultrafiltration polishing systemGallery Image 5
UV or chlorination disinfection packageGallery Image 6
Commissioned treated water reuse and storage systemApplications & Selection
How This Tertiary Treatment Plant Improves Wastewater Reuse Performance
This tertiary treatment plant is designed for facilities that need advanced treated water polishing, consistent reuse quality, lower turbidity, disinfection, and compliant discharge.
Typical Tertiary Treatment Plant Applications
WTE recommends the right Tertiary Treatment Plant after reviewing treated water source, TSS, turbidity, residual COD/BOD, reuse target, operating pattern, and site layout.
- • STP treated water polishing for flushing, gardening, washing, and cooling tower make-up
- • ETP treated effluent polishing for turbidity, TSS, colour, odour, and residual organics reduction
- • Pre-treatment before RO, UF, reuse distribution, process utilities, or ZLD recovery systems
- • Integrated with filtration, carbon polishing, micron filtration, UV, chlorination, ozone, or automated backwash systems
What WTE Reviews Before TTP Selection
WTE reviews inlet quality, outlet target, filtration duty, disinfection needs, backwash availability, automation level, and space constraints before recommending a Tertiary Treatment Plant.
- • Average and peak flow, operating hours, treated water tank volume, and hydraulic pressure
- • Inlet TSS, turbidity, pH, colour, odour, residual COD/BOD, oil traces, and microbial load
- • Technology selection: PSF, DMF, ACF, micron filter, ultrafiltration, UV, chlorine, ozone, or polishing skid
- • Outlet norms, reuse requirement, footprint, media selection, backwash frequency, automation level, and maintenance access
FAQ
Tertiary Treatment Plant FAQs
Clear answers about Tertiary Treatment Plant selection, wastewater polishing, reuse quality, compliance, disinfection, automation, and maintenance.
What is a tertiary treatment plant?
A Tertiary Treatment Plant is an advanced polishing system installed after primary and secondary treatment to reduce fine solids, turbidity, colour, odour, residual organics, oil traces, and microorganisms before reuse or discharge.
Where is a tertiary treatment plant used?
A Tertiary Treatment Plant is used after STP, ETP, biological treatment, clarification, or MBR systems where treated wastewater reuse or discharge compliance is required.
How does an industrial tertiary treatment plant work?
An industrial Tertiary Treatment Plant pumps secondary treated water through dosing, media filtration, activated carbon filtration, fine filtration or ultrafiltration, and final disinfection.
Can WTE customize a tertiary treatment plant for my site?
Yes. WTE customizes each tertiary treatment plant according to flow rate, inlet TSS/turbidity/COD/BOD, outlet standard, reuse requirement, filtration stages, disinfection method, footprint, automation level, and backwash needs.
Can tertiary treated water be reused?
Yes. With suitable filtration and disinfection, tertiary treated water can be reused for flushing, gardening, floor washing, road washing, cooling tower make-up, horticulture, process utilities, and other non-potable applications.
Does WTE supply automatic tertiary treatment plants?
Yes. WTE supplies manual, semi-automatic, and automatic tertiary treatment plants with feed pumps, filters, dosing systems, backwash valves, disinfection units, instruments, piping, and control panels.